Repair Harddisk Bad Sector Pro 2008

Program has 2 levels:
Drive level testing- main function is testing and repair (regenerates) bad sectors for detected devices- you get many information about detected devices
File level testing- read/find/check items (MBR, boot, directories, etc.) of file system FAT12/16/32- check/remove (regenerates) bad sectors records, flags in FAT table
Development of real mode versions of HDAT2 is finished/stopped.
Features:* fully implemented commands: SET MAX, SET SECURITY, Device Configuration Overlay* device access with interrupt 13h, direct via ATA ports, with ASPI drivers* detects ATA/ATAPI/SATA/SATA with NCQ devices with on-board and add-on controller cards* detects USB devices via USB ASPI driver only* detects SCSI hard drives via INT13h or ASPI drivers* other SCSI devices are detected via ASPI drivers only (must be loaded before)* with ASPI drivers you got more informations about SCSI devices* test and repair device for bad sectors* many different test-functions for hard drives* resize hard drives which supports SET MAX ADDRESS/EXT (supports 28/48-bits LBA addressing modes)* drive lock detection via security feature (Security Menu)* S.M.A.R.T. functions for ATA/SATA and SCSI/USB drives only* informations about devices (ATA/ATAPI, INT13h, ASPI)* sector viewer for devices (also for ZIP, CD-data discs)* to access ATA/SATA CD-ROM drive you don't need any driver or MSCDEX* enable/disable some features for direct-access devices* Device Configuration Overlay (DCO) feature set (you can restore a full capacity or allow/disallow some feature sets of hard drive)

Download Here: